Heat Meters

Sensor probes:- 4 wire PT100
clamp-on 150mm probes.
Transducer Temperature Range:-
-0°C to +180°C.
Power:- Battery powered.
Option:- Mbus output, external datalogger.
Relaceable Battery Life:-
Approximately 6 years.

Display:- LCD.
Units:- Selectable, volume, Delta T, Hot and Cold temperature, Kwh Total, Instant energy.
Output:- Pulse, Pulse with Mbus option.
Programming:- No programming required- set and forget.

Click hereto request a quote.

Sensor probes:- 4 wire PT100 clamp-on 150mm or 2 wire 50mm PT500 insertion probes.
Transducer Temperature Range:- -0°C to +180°C.
Power:- 240VAC or via Mbus, Battery powered option available.
Options:- Heat carrier medium type to order, supplied as standard for water.
Display:- LCD.
Units:- Selectable, volume, Delta T, Hot and Cold temperature, Kwh Total, Instant energy.
Outputs:- Pulse Kwh+Pulse M³ with Mbus output,
4-20mA x 2 assignable with Mbus output.
Programming:- No programming required- set and forget.

Click hereto request a quote.

Pipe Connections – G¾B to G2B or flanged connections
Pipe Sizes – DN15 to DN50
Nominal Flow Range Qp – 0.6m³/h to 15m³/h dependent on size
Maximum Flow Range – 1.2m³/h to 30m³/h dependent on size
Minimum Flow Range – 6l/h to 150l/h dependent upon size
Nominal Pressure – PN16/25
Maximum Operating Temperature – 130°C (150°C emergency maximum)
Outputs – Choice of option board outputs including E/V pulse and M-bus
Power Supply – Long life Lithium Battery (12 years typical), 230Vac or powered by M-bus network
Temperature Sensors – PT100 2 wire with 1.7 m cable (other lengths on request)
Optional – Connection of two external water meters with some option boards

Click hereto request a quote.

Pipe Connections – G¾A or G1A
Pipe Sizes – DN15 and DN20
Nominal Flow Range Qp – 0.6m³/h to 2.5m³/h dependent on size
Maximum Flow Range – 1.5m³/h to 3.75m³/h dependent on size
Minimum Flow Range – 6l/h to 25l/h dependent upon size
Nominal Pressure – PN16
Temperature Range – 20°C...90°C
Outputs – Optional Output Connections with pulse or M-bus output and option to connect up to 4 external water meters
Power Supply – 3.6V Lithium Battery (10 years typical)
Temperature Sensors – PT100 2 wire with 1.2 m coiled cable

Click hereto request a quote.

Temperature Range – 0...180°C
Temperature Differential – 1(3)...160°C
Sensors – Pt100 or PT500, 2 or 4 wire (CF51 2 wire only)
Power Supply – 12 year Lithium Battery, 230Vac or powered by M-bus network
Protection Class – IP64
Output – Choice of output option boards including E/V pulse and M-bus
Optional – Connect up to 2 external water meters with some options boards

Click hereto request a quote.